For 1-3/4″ Splined Rear Axle. Fits the X7 Chassis on the left side. Use when configuring for the standard wheel base, standard rear axle position configuration. Fits Jacob’s ladder or panhard bar configuration.
CNC machined Bearing Carrier includes double row angular contact bearing, bubble level, and grease fitting. Control arm mount distance is 6″.
Uses (8) 1/4-20 x 2″ HHCS.
(2) 5/16-18 x 4″ FHCS to hold chain guide block when using 1-1/4″ or 1-1/2″ long spacers with (2) 5/16″ hard washers. For the 1″ or 3/4″ long spacers, use (2) 5/16-18 x 3-1/2″ FHCS and for 1/2″ or 5/16″ spacers, use (2) 5/16-18 x 3″ FHCS.
*Photo taken with Ti bolts. Kit does not come standard with Ti bolts.